Crochet Plant Hanger Pattern

This crochet plant hanger pattern is a simple way to turn an ordinary flower pot into a cozy handmade decor piece. The design combines a textured crochet sleeve, an airy openwork section, and sturdy hanging straps for a relaxed boho look.

This project is great for confident beginners who already know basic crochet stitches and want to make something practical for the home. The hanger works well with small indoor plants, herbs, pothos, succulents, or decorative faux plants.

You can make it in warm mustard, soft cream, sage green, terracotta, or any color that matches your room. The pattern is also easy to resize for different pots by adjusting the starting round and height.

Why You’ll Love This Crochet Plant Hanger Pattern

• Clear step-by-step sections make the project easier to follow.
• Materials, sizing, finishing, and customization notes are easy to find.
• The pattern includes practical tips for a neat handmade result.

Project Details

Detail	Information
Skill Level	Confident Beginner
Estimated Time	3 to 5 hours
Finished Pot Size	Fits approximately a 5 to 6 inch (12.5 to 15 cm) diameter pot
Finished Sleeve Height	Approximately 5 inches (12.5 cm)
Hanging Length	Approximately 18 to 22 inches (46 to 56 cm)
Crochet Terminology	US terms
Construction Method	Base worked in rounds, sides built upward, openwork motif added, then hanging straps attached

Materials

• Worsted weight cotton yarn (#4), approximately 120 to 180 yards (110 to 165 m)
• 4.5 mm crochet hook
• Yarn needle
• Scissors
• Stitch marker
• Measuring tape
• 5 to 6 inch plant pot

Yarn

Cotton yarn is a good choice for this project because it gives the plant holder structure and helps the straps stay firm. A cotton blend can also work if you want a slightly softer drape.

For a natural boho look, try cream, beige, mustard, olive, rust, or terracotta. You can also make several hangers in different colors for a coordinated plant display.

Hook Size

Use a 4.5 mm crochet hook. If your stitches feel too loose and the holder does not support the pot well, go down to a 4.0 mm hook. If your fabric feels too stiff, move up to a 5.0 mm hook.

Gauge

Gauge is not extremely strict for this decor project, but the holder should fit closely around the pot.

Approximately 15 single crochet stitches x 16 rows = 4 x 4 inches (10 x 10 cm).

Measure your pot before starting. The finished holder should be slightly smaller than the pot circumference so it stretches gently around it.

Abbreviations

• MR = magic ring
• ch = chain
• sc = single crochet
• hdc = half double crochet
• dc = double crochet
• sl st = slip stitch
• sp = space
• BLO = back loop only
• st(s) = stitch(es)
• rep = repeat

Before You Start

• The holder is worked from the bottom upward.
• Use a stitch marker to mark the first stitch of each round.
• Ch 1 does not count as a stitch.
• The openwork section is decorative but should still fit closely around the pot.
• Check the fit frequently while crocheting.
• The hanging straps are made separately from chains reinforced with slip stitches.

Crochet Plant Hanger Pattern Instructions

Part 1 — Crochet the Base

With your main color, make a MR.

Round 1: Ch 1, work 8 sc into the MR. Pull closed and join with sl st. (8 sts)

Round 2: Ch 1, 2 sc in each st around. Join. (16 sts)

Round 3: Ch 1, sc in next st, 2 sc in next st around. Join. (24 sts)

Round 4: Ch 1, sc in next 2 sts, 2 sc in next st around. Join. (32 sts)

Round 5: Ch 1, sc in next 3 sts, 2 sc in next st around. Join. (40 sts)

Place your pot over the base. The crochet circle should be close to the diameter of the bottom of the pot.

Part 2 — Turn the Base Into the Side Wall

Round 6: Ch 1, working in BLO only, sc in each st around. Join. (40 sts)

This creates a neat fold that helps the holder turn upward.

Rounds 7–8: Ch 1, sc in each st around. Join. (40 sts)

Part 3 — Add the Openwork Section

Round 9: Ch 3, skip 2 sts, sc in next st, ch 3, skip 2 sts, sc in next st around. Join.

Round 10: Sl st into first ch-3 space. Ch 3, work 4 dc in same space, sc in next ch-3 space. 5 dc in next ch-3 space, sc in next ch-3 space around. Join.

Round 11: Ch 4, sc in center dc of next shell, ch 4, sc in center dc of next shell around. Join.

Round 12: In each ch-4 space, work sc, hdc, 3 dc, hdc, sc. Repeat around. Join.

This creates a decorative lace-like texture around the middle of the pot holder.

Part 4 — Finish the Upper Section

Round 13: Ch 1, sc evenly around, working approximately 2 to 3 sc over each decorative section as needed to create a smooth round. Keep the total close to 40 sts.

Rounds 14–16: Ch 1, hdc in each st around. Join.

Round 17: Ch 1, sc in BLO around. Join.

Round 18: Ch 1, sc in each st around. Join and fasten off.

Try the holder on the pot. The top edge should sit securely around the upper section without sliding off.

Part 5 — Make the Hanging Straps

Make 3 straps.

For each strap, ch 70 to 85 depending on how long you want the hanger.

Starting in the second ch from hook, sl st in each ch across. This reinforces the chain and reduces stretching.

Fasten off, leaving a long tail for sewing.

For a longer hanging planter, simply add more chains.

Part 6 — Attach the Straps

Divide the top edge of the holder into 3 evenly spaced sections.

Sew one end of each strap securely to the rim. Make several strong stitches through the upper crochet rounds.

Bring the 3 straps together above the pot and check that the holder hangs level.

Tie the strap ends together securely or sew them into a strong hanging loop.

Optional Reinforced Hanging Loop

If you prefer a neater top loop, ch 20 and slip stitch back across the chain.

Fold this short cord into a loop and sew it firmly around the joined ends of the 3 long straps.

This gives you a clear hanging point for a hook.

Finishing

• Weave in all yarn ends securely.
• Check every strap attachment point.
• Place the empty pot into the holder before adding the plant.
• Hang the holder temporarily at a low height to check balance.
• Adjust strap lengths if necessary.

For best results, use a lightweight plant and pot. Always hang the holder from a strong hook that is suitable for the total weight.

Finished Size

The finished holder fits approximately a 5 to 6 inch (12.5 to 15 cm) diameter pot.

The crochet sleeve measures approximately 5 inches (12.5 cm) tall, while the full hanging length is approximately 18 to 22 inches (46 to 56 cm).

How to Resize the Plant Hanger

To make the holder larger, continue adding increase rounds to the base before beginning the sides.

• Next increase round: sc in next 4 sts, 2 sc in next st
• Following round: sc in next 5 sts, 2 sc in next st

Continue the same increase pattern until the base matches the bottom of your pot.

For a taller pot, add more straight rounds before or after the decorative openwork section.

Tips for a Better Fit

• Measure the pot before starting.
• Use cotton yarn for better structure.
• Keep your tension even so the sleeve does not become loose.
• Do not make the straps too stretchy.
• Check that all 3 straps are the same length before sewing them permanently.
• Keep the top edge snug enough to support the pot securely.

Customization Ideas

• Minimalist version: use cream or natural cotton yarn.
• Boho version: try mustard, rust, olive, or terracotta.
• Two-tone version: make the base and top in one color and the openwork section in another.
• Longer hanger: add extra chains to each strap.
• Short kitchen version: use shorter straps for hanging herbs near a window.
• Plant wall: make several hangers in coordinating colors and different lengths.

Why Crochet Plant Hangers Make Great Home Decor

Crochet plant hangers add texture and handmade character without taking up shelf or floor space. They are especially useful for small rooms, kitchens, craft rooms, and sunny window areas.

They also make thoughtful handmade gifts for plant lovers, housewarmings, birthdays, or anyone who enjoys cozy boho decor.

Looking for Your Next Crochet Project?

Love this project? Explore Cute Stitch Studio’s premium crochet patterns for more cute, cozy, gift-worthy, and beginner-friendly handmade ideas.