4-Size Baby Bear Hat Crochet Pattern

If you have been looking for a sweet and beginner-friendly baby bear hat crochet pattern, this cozy design is a fun project to make for babies, baby showers, handmade gifts, and everyday wear. It has a soft textured body, a comfy ribbed brim, and the cutest little bear ears on top.

This hat is designed in four baby sizes, from newborn through 6–12 months, so you can make a custom fit for little ones at different stages. The shape is simple, the stitch pattern is easy to learn, and the finished result looks polished without being complicated.

The hat is worked in three main steps: first the ribbed brim, then the textured hat body, and finally the rounded ears. If you are comfortable with basic stitches like single crochet and double crochet, you can absolutely make this project.

4-size Baby Bear Hat Crochet Pattern Instructions

Why You’ll Love This 4-size Baby Bear Hat Crochet Pattern

• Clear step-by-step sections make the project easier to follow.
• Materials, sizing, finishing, and customization notes are easy to find.
• The pattern includes practical tips for a neat handmade result.

Project Details

Detail	Information
Skill Level	Easy
Estimated Time	2 to 4 hours depending on size and crochet speed
Sizes	Newborn, 0–3 months, 3–6 months, 6–12 months
Crochet Terminology	US terms
Construction Method	Ribbed brim worked in rows, joined into a ring, body worked upward in rounds, top seamed flat, ears sewn on last

Size Chart

Use the size chart below as a guide. Baby head sizes can vary, so measuring the baby’s head or comparing to a favorite hat is always helpful.

Size	Recommended Head Size	Finished Hat Circumference	Finished Hat Height
Newborn	13–14 in (33–35.5 cm)	12.5 in (31.75 cm)	5 in (12.75 cm)
0–3 months	14–15 in (35.5–38 cm)	13.5 in (34.25 cm)	5.5 in (14 cm)
3–6 months	15–16 in (38–40.5 cm)	14.5 in (36.75 cm)	6 in (15.25 cm)
6–12 months	16–18 in (40.5–45.75 cm)	16 in (40.5 cm)	6.5 in (16.5 cm)

Materials

• Medium weight #4 yarn, approximately 60 (80, 100, 120) yards / 55 (73, 91, 110) meters
• 5 mm (H-8) crochet hook
• Tapestry needle
• Stitch marker
• Scissors
• Measuring tape

For the softest finish, choose a baby-friendly yarn such as machine-washable acrylic, merino blend, or cotton blend. This pattern looks beautiful in teddy-bear shades like oatmeal, taupe, mocha, blush, dusty blue, mint, or cream.

Hook Size

Use a 5 mm (H-8) crochet hook for the pattern. If your hat turns out too tight or too small, try going up a hook size. If it turns out too loose or too large, go down a hook size.

Yarn

This pattern is written for medium weight #4 yarn. A soft, slightly structured yarn helps the textured stitch stand out while keeping the hat comfortable for babies.

• Yarn Weight: #4 worsted / aran
• Approximate Yardage: 60 (80, 100, 120) yards / 55 (73, 91, 110) meters
• Fiber Recommendation: soft acrylic, merino blend, or cotton blend
• Color Ideas: blush pink, oatmeal, beige, mint, dusty blue, chocolate brown, warm taupe

Gauge

Gauge matters for this wearable project so the finished fit is more accurate.

• Body Stitch Gauge: 12 stitches x 10 rounds = 4 in x 4 in (10 cm x 10 cm) in textured body stitch
• Brim Gauge: 16 rows x 6 single crochet stitches = 4 in x 4 in (10 cm x 10 cm) in ribbing

If your gauge is off, adjust hook size before continuing.

Abbreviations

• ch = chain
• sc = single crochet
• dc = double crochet
• sl st = slip stitch
• st(s) = stitch(es)
• BLO = back loop only
• rep = repeat
• MR = magic ring

Before You Start / Pattern Notes

• The brim is worked in rows to create stretch.
• The body is worked in joined rounds.
• The ch 1 at the beginning of rows and rounds does not count as a stitch unless stated otherwise.
• The textured body uses a simple paired stitch pattern that creates a cozy, woven look.
• The top of the hat is seamed flat, then the ears are sewn onto the upper corners.
• Read through the whole pattern before starting, especially if you are making a specific size.

Special Stitch: Body Texture

The hat body uses a simple repeat: (sc, dc) in one stitch, skip the next stitch. In later rounds, you will work the next (sc, dc) into each previous round’s sc stitch and skip each dc stitch. This creates the soft, textured fabric.

Step-by-Step Crochet Instructions

Part 1 — Ribbed Brim

For all sizes: Ch 7.

Row 1: Sc in 2nd ch from hook and in each ch across. (6 sc)

Row 2: Ch 1, turn, sc BLO in each st across. (6 sc)

Repeat Row 2 until your strip reaches the following row counts:

• Newborn: 36 rows
• 0–3 months: 39 rows
• 3–6 months: 42 rows
• 6–12 months: 46 rows

The strip should stretch gently to fit the target head size. If needed, add or remove a couple of rows for a custom fit.

Join Brim: Fold the brim so the short ends meet. Slip stitch or sew the short ends together to form a ring. Turn so the seam is on the inside.

Part 2 — Hat Body

You will now work around the top edge of the brim.

Round 1: Ch 1. Work sc evenly around the top edge of the brim. Join with sl st to first sc.

• Newborn: 42 sc
• 0–3 months: 48 sc
• 3–6 months: 54 sc
• 6–12 months: 60 sc

Tip: Place stitches evenly so the brim does not pull or flare. You are working into row ends, so spacing matters more than exact placement.

Round 2: Ch 1. (Sc, dc) in first st, skip next st, rep around. Join with sl st to first sc.

Round 3: Ch 1. (Sc, dc) in the first sc of the previous round, skip the next dc, rep around. Join with sl st to first sc.

Repeat Round 3 until the body measures the following height from the top edge of the brim:

• Newborn: 3.75 in (9.5 cm)
• 0–3 months: 4 in (10 cm)
• 3–6 months: 4.5 in (11.5 cm)
• 6–12 months: 5 in (12.75 cm)

This is usually about:

• Newborn: 10 total body rounds
• 0–3 months: 11 total body rounds
• 3–6 months: 12 total body rounds
• 6–12 months: 13 total body rounds

Do not worry if your round count differs slightly. Measuring the height is more important than matching the exact number of rounds.

Part 3 — Top Seam

Fasten off, leaving a long tail. Flatten the hat so the seam of the brim sits at the back center. Line up the top edge evenly.

Sew or slip stitch the top edge closed straight across. This creates the basic hat shape and gives you two upper corners where the ears will sit.

Weave in the seam securely, but do not cut the yarn tail until you are happy with the shape.

Part 4 — Bear Ears (Make 2)

Round 1: 6 sc in MR. Join. (6)

Round 2: Ch 1, 2 sc in each st around. Join. (12)

Round 3: Ch 1, *sc in next st, 2 sc in next st* around. Join. (18)

Optional Round 4 for a slightly larger ear: Ch 1, sc around. Join. (18)

Fasten off, leaving a sewing tail. Flatten each ear lightly with your fingers. Do not fold them hard—just shape them into soft rounded ears.

Part 5 — Assembly

Place one ear near each upper corner of the hat. Position the straight edge of the ear slightly below the top seam so the rounded edge sits upward and outward.

Sew each ear in place with small, secure stitches along the lower edge of the ear only. Leave the top curve free so the ear keeps its rounded shape.

Before fully fastening off, step back and check that both ears are even and symmetrical.

Finishing

• Weave in all ends neatly on the inside.
• Check the top seam and ear attachment to make sure they are secure.
• Lightly shape the hat with your hands.
• If needed, use a gentle steam block or light mist blocking, but avoid overstretching the ribbed brim.
• For baby gifts, include care instructions based on the yarn you used.

Finished Size

After finishing, the approximate measurements are:

• Newborn: 12.5 in circumference x 5 in tall (31.75 cm x 12.75 cm)
• 0–3 months: 13.5 in circumference x 5.5 in tall (34.25 cm x 14 cm)
• 3–6 months: 14.5 in circumference x 6 in tall (36.75 cm x 15.25 cm)
• 6–12 months: 16 in circumference x 6.5 in tall (40.5 cm x 16.5 cm)

Tips & Customization

• Use a teddy-bear brown for a classic look, or try blush, mint, oatmeal, or dusty blue for a softer nursery style.
• Add a small folded tag at the brim for a boutique-style finish.
• For a slouchier look, add 1 extra inch (2.5 cm) to the body height before seaming the top.
• For a snugger newborn photo hat, make the brim with 2 fewer rows.
• This pattern also works well for sibling sets in different colors.
• Pair the hat with matching booties, a baby cocoon, or a simple blanket for a sweet gift set.

Baby & Child Safety

This hat is intended for everyday wear with normal supervision. Always check fit before use, make sure the ears are sewn on securely, and remove the hat if it becomes too tight, too loose, or uncomfortable. Do not leave babies unattended with handmade accessories, and do not use hats or bulky accessories for sleep.

Frequently Asked Questions

Is this 4-size Baby Bear Hat Crochet Pattern beginner-friendly?

Check the Skill Level and Pattern Notes sections before you begin. Read through the full pattern once, then keep a stitch marker and your materials nearby as you work.

What yarn should I use for this crochet project?

Use the yarn weight and fiber recommendations listed in the Yarn section. Matching the suggested yarn weight will help you stay closer to the intended size and fabric.

Can I change the colors?

Yes. Color changes are one of the easiest ways to personalize this project without changing the core construction. Keep the same yarn weight for the most consistent result.

How can I keep my stitch counts accurate?

Count at the end of each row or round, move your stitch marker as you work, and correct missed increases or decreases before continuing to the next section.

Looking for Your Next Crochet Project?

Love this project? Explore Cute Stitch Studio’s premium crochet patterns for more cute, cozy, gift-worthy, and beginner-friendly handmade ideas.