Crochet Baby Bear Hat and Booties Pattern

This crochet baby bear hat and booties pattern creates a matching cream-colored set with rounded ears, soft brown noses, and plenty of teddy bear character. The hat has large yarn-based eyes, while the booties feature smaller embroidered faces.

Plush yarn gives the pieces their cuddly texture. Make the set as a baby shower gift or an accessory for supervised, awake photos.

This original Cute Stitch Studio design uses simple single crochet shaping. It suits an adventurous beginner who is comfortable counting stitches, working around a foundation chain, and sewing small pieces securely.

Project Details

• Skill level: Adventurous beginner.
• Estimated time: Approximately 5–8 hours for the complete set.
• Size: One baby size, selected by head and foot measurements.
• Hat circumference: Approximately 16 inches (40.6 cm), relaxed.
• Hat depth: Approximately 6 inches (15.2 cm), excluding ears.
• Bootie sole: Target approximately 4 inches long by 2 inches wide (10.2 × 5.1 cm).
• Crochet terminology: US terms.
• Construction: Hat worked from the crown down; booties worked from oval soles upward; ears and facial pieces sewn on afterward.

This original pattern has not been physically tested. Measurements, fit, and yarn quantities are estimates. Check the first hat and bootie against the intended measurements before completing the set.

Sizing and Fit

Use actual measurements rather than an age label. A baby may need different adjustments for the hat and booties.

Piece	Finished target	Fit guideline
Hat	16-inch relaxed circumference; 6-inch depth	Start by checking against a head measuring approximately 16.5–17.5 inches, provided the fabric stretches comfortably.
Booties	4 × 2-inch exterior sole	Start by checking against a foot approximately 3.5 inches long. Confirm interior width and toe room.

The hat should sit above the eyes without squeezing. The booties should slide on gently and leave room for the toes. Exterior sole measurements include fabric thickness and do not equal usable interior space.

If making a gift, ask for measurements or label the finished dimensions clearly.

Materials

• Approximately 160–200 yards of cream super bulky chenille yarn for the hat, booties, ears, and muzzles.
• Approximately 10 yards of white DK yarn for the hat eye backings and highlights.
• Approximately 10 yards of black DK yarn for the hat pupils and bootie eyes.
• Approximately 5 yards of brown DK yarn for the noses.
• 5.5 mm crochet hook for the plush pieces, or the size needed for gauge.
• 3 mm crochet hook for the hat eye pieces.
• Yarn needle.
• Scissors.
• Four removable stitch markers.
• Measuring tape.

No plastic eyes, buttons, beads, or stuffing are needed. The small muzzles are attached without filling.

Hook Sizes

Start with a 5.5 mm hook for the chenille yarn and a 3 mm hook for the DK eye pieces.

Adjust the larger hook to achieve the garment gauge. The fabric should feel soft and flexible, with stitches close enough to hold their shape.

Yarn

Use super bulky chenille yarn, category 6, for the plush pieces. Choose a yarn whose care instructions suit the intended use.

Yarns within this category vary considerably in thickness. Matching the gauge matters more than matching the weight label alone.

Use smooth DK yarn for small facial details. Cream, white, black, and warm brown reproduce the soft teddy bear color palette.

Gauge

Plush fabric: 10 single crochet stitches and 12 rounds = 4 inches (10 cm), worked in the round and measured without stretching.

Eye pieces: Exact gauge is less critical. Each white backing should measure approximately 1–1.25 inches across, with the black pupil smaller than its backing.

Check the hat circumference after Round 7 and the sole dimensions after Bootie Round 3. These checkpoints help catch a yarn or tension mismatch before you invest more time.

Abbreviations

• ch: chain.
• sc: single crochet.
• sl st: slip stitch.
• st(s): stitch(es).
• inc: work 2 single crochet stitches in the same stitch.
• sc2tog: single crochet 2 stitches together.

Before You Start

• Work the hat and ear pieces in continuous rounds unless instructed otherwise.
• Use a marker in the first stitch and move it after every round.
• The bootie soles and uppers use joined rounds.
• Beginning chains and joining slip stitches do not count as stitches.
• Work through both loops throughout.
• Leave long yarn tails for sewing the separate pieces.
• Keep chenille tension relaxed enough that the yarn moves without excessive pulling.

How to Work sc2tog

Insert the hook into the next stitch, yarn over, and pull up a loop. Repeat in the following stitch. Yarn over and pull through all three loops on the hook. Two stitches become one.

Crochet Baby Bear Hat and Booties Pattern: Step-by-Step

Part 1 — Bear Hat

Use cream chenille yarn and the larger hook. Chain 2.

Round 1: Work 6 sc in the second chain from the hook. 6 sts.

Round 2: Inc in every st. 12 sts.

Round 3: (Sc in the next st, inc) 6 times. 18 sts.

Round 4: (Sc in the next 2 sts, inc) 6 times. 24 sts.

Round 5: (Sc in the next 3 sts, inc) 6 times. 30 sts.

Round 6: (Sc in the next 4 sts, inc) 6 times. 36 sts.

Round 7: (Sc in the next 8 sts, inc) 4 times. 40 sts.

Rounds 8–18: Sc in every st. 40 sts in each round.

Sl st in the next st and fasten off. Secure the starting chain opening from the inside with the yarn tail if needed.

At the intended gauge, the hat measures approximately 16 inches around and 6 inches deep. Check the depth before adding the face; the lower edge should remain above the eyes.

Part 2 — Hat Ears

Make two with cream chenille yarn. Chain 2.

Round 1: Work 6 sc in the second chain from the hook. 6 sts.

Round 2: Inc in every st. 12 sts.

Round 3: Sc in every st. 12 sts.

Do not stuff. Flatten each ear so six stitches on one side line up with six on the other. Work 6 sc through both layers to close the base.

Fasten off with a long sewing tail. The rounded starting end forms the top of the ear.

Part 3 — Hat Eye Backings

Make two with white DK yarn and the smaller hook. Chain 2.

Round 1: Work 6 sc in the second chain from the hook. 6 sts.

Round 2: Inc in every st. 12 sts.

Round 3: (Sc in the next st, inc) 6 times. 18 sts.

Sl st in the next st and fasten off with a long sewing tail.

Part 4 — Hat Pupils

Make two with black DK yarn and the smaller hook. Chain 2.

Round 1: Work 6 sc in the second chain from the hook. 6 sts.

Round 2: Inc in every st. 12 sts.

Sl st in the next st and fasten off with a sewing tail.

Center each black circle on a white backing and sew around its edge. Add one short white embroidered highlight near the upper part of each pupil. Secure all ends behind the pieces.

Part 5 — Hat Muzzle

Use cream chenille yarn and the larger hook. Chain 2.

Round 1: Work 6 sc in the second chain from the hook. 6 sts.

Round 2: Inc in every st. 12 sts.

Round 3: Sc in every st. 12 sts.

Sl st in the next st and fasten off with a long sewing tail. Leave the muzzle unstuffed.

With brown DK yarn, embroider a small rounded triangle over the center. Use several short stitches to fill the shape, then add one short line below it for the mouth.

Part 6 — Assemble the Hat

Place the hat with its round beginning at the back. Arrange the ears symmetrically on the upper left and right sides, approximately around Rounds 4–7.

Sew each flattened ear base securely to the hat. Catch all six base stitches and reinforce both ends.

Position the eyes on the front, approximately across Rounds 10–13, leaving about 0.5 inch between their inner edges. Check the expression before sewing around each white backing.

Place the muzzle centrally below the eyes, approximately across Rounds 13–17. Keep its lower edge above the hat opening.

Sew around the entire muzzle edge, flattening the unstuffed cup gently against the hat. Secure all ends on the inside without leaving long loops.

Part 7 — Bootie Soles

Make two booties. Use cream chenille yarn and the larger hook. Chain 7.

Round 1: Work 2 sc in the second chain from the hook, sc in the next 4 chains, and 3 sc in the last chain. Rotate to work along the unused side of the foundation chain. Sc in the next 4 chains, then work 1 sc in the chain containing the first 2 sc. Join with a sl st to the first sc. 14 sts.

Round 2: Ch 1. Inc in each of the first 2 sts, sc in the next 4 sts, inc in each of the next 3 sts, sc in the next 4 sts, and inc in the last st. Join. 20 sts.

Round 3: Ch 1. (Sc in the next st, inc) twice, sc in the next 4 sts, (sc in the next st, inc) three times, sc in the next 4 sts, then sc in the next st and inc in the last st. Join. 26 sts.

Check the sole now. Aim for approximately 4 inches long by 2 inches wide. If the size differs noticeably, adjust the yarn or hook and remake the sole before continuing.

Part 8 — Bootie Walls

Wall Round 1: Ch 1. Sc in every st. Join. 26 sts.

Wall Round 2: Ch 1. Sc in every st. Join. 26 sts.

Fasten off. Place the sole flat and choose one rounded end as the toe.

Mark a group of 10 consecutive stitches centered around the toe. Put markers in the first and last stitches of that group. The other 16 stitches run around the sides and heel.

Part 9 — Shape the Toe

Join cream yarn in the first marked toe stitch. The beginning of the round now sits beside the toe.

Shaping Round 1: Ch 1. Sc2tog five times across the 10 marked toe stitches, then sc in each of the remaining 16 sts. Join. 21 sts.

Shaping Round 2: Ch 1. Sc2tog, sc in the next st, sc2tog, then sc in the remaining 16 sts. Join. 19 sts.

Shaping Round 3: Ch 1. Sc in the first 3 sts, sc in the next 7 sts, sc2tog, then sc in the last 7 sts. Join. 18 sts.

The first three stitches sit over the shaped toe. The single decrease in this round narrows the center heel.

Part 10 — Ankle Cuff

Cuff Rounds 1–4: Ch 1. Sc in every st. Join. 18 sts in each round.

Fasten off and weave in the end. This version has a simple soft cuff rather than a separate ribbed band.

Check that the opening slips over the foot comfortably. Make the second bootie with matching sole measurements and the same number of rounds.

Part 11 — Bootie Ears

Make four with cream chenille yarn, two for each bootie.

Round 1: Ch 2, then work 6 sc in the second chain from the hook. Join with a sl st. 6 sts.

Fasten off with a long sewing tail. These small circles stay flat and unstuffed.

Position one circle on either side of each toe face. Sew approximately the lower third of each circle to the bootie, then reinforce the attachment with a second pass. Leave the upper part visible as a rounded ear.

Part 12 — Bootie Faces

With brown DK yarn, embroider a small nose at the center of each toe. Use short stitches to create a rounded triangular shape approximately 0.4 inch wide.

With black DK yarn, embroider two small eyes above the nose, evenly spaced to either side. Make each eye with two or three short stitches rather than a loose knot.

Keep the facial details on the toe surface, below the cuff opening. Check both booties side by side before securing the final tails.

Finishing

Inspect the hat and both booties from the inside. Weave in every loose tail and remove long embroidery floats that could catch.

Check the ear, eye, and muzzle attachments with a gentle tug. Reinforce any area that shifts or lifts away from the fabric.

Shape the pieces with your fingers. If washing is needed, follow the yarn label and dry the set completely before use. Do not stretch wet pieces around a baby’s head or feet.

Finished Size

The hat targets approximately 16 inches around and 6 inches deep (40.6 × 15.2 cm), excluding the ears.

Each bootie targets an exterior sole approximately 4 inches long by 2 inches wide (10.2 × 5.1 cm). The cuff opening measures approximately 7.2 inches (18.3 cm) around at gauge.

Fit depends on the actual fabric, foot shape, and yarn stretch. The opening should feel comfortable without needing to be forced over the foot.

Tips and Customization

• Try a different bear color: Pale oatmeal, warm beige, or light brown works well with the same facial colors.
• Use sleepy eyes: Replace the hat’s separate eye circles with simple embroidered curved lines.
• Adjust hat depth: Add or remove one plain round for approximately one-third of an inch. Reposition the face afterward.
• Shorten the bootie cuff: Work two cuff rounds instead of four for a lower ankle opening.
• Keep the pair consistent: Make both soles first and compare their dimensions before building the uppers.
• Add a gift note: Include the finished measurements, fiber content, and washing instructions.

For substantially different head or foot sizes, use a separately graded pattern. Adding random increases to the sole changes the toe shaping as well as the length.

Baby Use and Care

Use the set for supervised, awake wear or photography. Remove the hat and decorative booties for sleep.

All facial details are yarn-based, but sewn pieces can still loosen. Check attachments before use and stop using the item if any piece becomes insecure.

The booties have soft yarn soles and are not designed as walking shoes. Keep the hat above the eyes and make sure neither piece feels tight.

Frequently Asked Questions

Is this crochet baby bear hat and booties pattern suitable for beginners?

It suits beginners who can count rounds and sew pieces together. Chenille makes stitches harder to see, so use markers and take time with the bootie soles.

Can I use ordinary worsted-weight yarn?

Not with the same expected measurements. A thinner yarn creates smaller pieces. Match the stated gauge or use a pattern written for your chosen yarn.

Are plastic safety eyes needed?

No. The hat uses crocheted circles and embroidery, and the bootie eyes are embroidered directly onto the fabric.

Why does the chenille yarn shed when I pull it?

Some chenille yarns lose fibers under friction or repeated pulling. Work gently, avoid repeatedly undoing the same section, and replace damaged lengths before continuing.

Can I make the booties without the hat?

Yes. Follow Parts 7–12 and make two matching booties. You will need less cream yarn than the full-set estimate.

Will one size fit every baby of the same age?

No. Head size, foot length, and foot width vary. Measure the intended wearer and check the finished pieces rather than relying on age alone.

Save This Baby Bear Crochet Set

Save this pattern to your baby crochet or handmade gift board on Pinterest so you can find it for your next baby shower project.

Looking for Your Next Crochet Project?

Love this project? Explore Cute Stitch Studio’s premium crochet patterns for more cute, cozy, gift-worthy, and beginner-friendly handmade ideas.